Conversion of seeders for liquid fertilizer application
Optimize machine performance and increase sowing accuracy with modern seeder conversion solutions
application technology during sowing
The main advantages of pop-up fertilizer application
- nutrition optimal for early plant development
- high utilization rate of nutrients from fertilizers
- Increased stress resistance and competitiveness of plants, resistance to pathogens and pests
- maximum efficiency at low application rates
- the ability to reduce the rate of application of the main fertilizer
- lower costs for transportation, storage and application
- practical storage and warehousing
- greater autonomy of the sowing unit
- lower fuel consumption
- practical storage and warehousing
- greater autonomy of the sowing unit
- lower fuel consumption
Systems for pop-up application of liquid starter fertilizers
The Company’s service department provides maintenance and installation of automated pumping systems for applying liquid fertilizers with a wide range of application rates (from 20 l/ha to 300 l/ha) to seeders of various configurations.
Service options
- Development and production of a system that is as ready for installation as possible
- Installation on the seeder
- Service support
- Development and production of a system that is as ready for installation as possible
- Service support
- Additional equipment of the existing system with separate options
- Service support
For more information, please contact our technical specialists.
Quantum. Chelated fertilizers.
IN-FURROW technology
IN-FURROW technology is the application of any preparations (fertilizers, 33P, microbial preparations, growth regulators, etc.) into the seed furrow or in the immediate vicinity of the seed during sowing (as a special case, the term POP-UP is used for the application of fertilizers only).
The main goal is to maximize the starting effect and minimize the negative stress factors that occur at the beginning of plant development, i.e. at the time when the plant is most vulnerable.
Advantages of combining Quantum Diphan with other components and mixing conditions
Метали повинні бути у повністю хелатованій формі. Дозволяє задовльнити частину потреби культури у мікроелементах
Препарати для грунтового внесення та інокулянти бобових. Дозволяє уникнути небажаного контакту мікроорганізмів із протруйниками
Екстракти морських водоростей, гумінові препарати, амінокислоти тощо. Дозволяє підвищити стартовий ефект
Створення поблизу насінини зони, вільної від шкідників і патогенів. Дозволяє вносити невеликі норми пестицидів із максимальною ефективністю
Introduction of IN-FURROW
Fertilizers for joint application with Quantum Diphane
- Quantum Zinc Chelate 117 EDTA (Zn)
1-3 l/ha
Quantum Siamine
0.5-1 l/ha - Quantum Manganese Chelate EDTA (Mn)
1-3 l/ha
Quantum VinPlant
40-60 ml/ha - Quantum BORON ACTIVE (B+)
0.5 l/ha
Quantum PLATINUM
1-3 l/ha
Options for re-equipment
In this system, the application rate is set by a crane and is set before the start of sowing without the possibility of adjustment during sowing.
Contents: 12V electric pump, pressure control valve (control valve), seeder position sensor, pressure gauge, nozzles, throttle washer set, taps, filters, hoses of different diameters, fittings, fittings, hardware, tighteners.
- Not high cost
- No adjustment of the flow rate during sowing
- No control of fertilizer application by nozzles
This system is calibrated before sowing and then automatically maintains the fertilizer application rate during sowing, reacting to changes in the speed of the seeder. This is the classic automation offered by most seeder conversion companies.
Package contents: 12V electric pump, manual main valve, overpressure relief valve, electric control valve, flow meter (monitors small flow rates), tractor cab controller, reed speed sensor, pressure gauge, nozzles, throttle washer kit, taps, filters, hoses of various diameters, fittings, fittings, hardware, tighteners.
- Automatic fertilizer rate control
- No control of fertilizer application on the coulters
- Large number of electrical components (reduced reliability in the field)
- High cost of maintenance
- Low possibility of repair in the field
The main feature of Agxcel’s pumping system is the ability to control both the total fertilizer consumption and the consumption of each coulter during sowing, monitoring its condition for contamination or leakage. A big advantage is that the control is not carried out by electronics (which are prone to breakdowns in the field), but by conventional mechanics based on the principle of hydrodynamics, which is highly reliable. Despite its apparent simplicity, this system is considered one of the best in the United States. The minimal amount of electronics allows the equipment to operate for a long time (with proper maintenance and storage).
Another advantage is that it is suitable for both holdings and small farms. The system is delivered in a fully assembled form, which allows the consumer to install it independently.
- Visualization of flow rates for each nozzle
- High reliability
- Easy to set up and maintain
- Maximum assembled kit (possibility of self-assembly)
- Possibility to use low application rates from 25 l/ha
- Relatively high cost
Video of installation of attachments
Our contacts
We are always in touch
Leave a request and our specialists will contact you as soon as possible.
